• Follow us :

    Products Center

    47 series ink

    This series of ink is a two-liquid reaction type ink, users can adapt to different drying conditions, can naturally dried at room temperature, free baking can also be baked at high temperature, fast drying, the ink film after the ink drying with excellent gloss, resistance wear resistance, impact resistance, oil resistance, flexibility and so on. Mainly used in metal, glass and other industries printing ink.

    It can be used for printing glassware, glass products, aluminum products.

    Ink adhesion test:
    Test Conditions Results
    Adhesion cross-hatch adhesion tape peeling, Hatch spacing 1mm 100%
    Water resistance Soak in tap water (room temperature) 72 hours without abnormal
    Gasoline resistance 100 90 # gasoline soaked cotton balls, rubbing force conventional 500g law code no abnormal test
    Alcohol-resistant cotton ball soaked in alcohol, conventional force to wipe 500g law code 50 times without abnormal
    Water-resistant banana banana water soaked cotton ball, wipe conventional 500g law code 50 times without abnormal force
    50 anti-butanone butanone soaked cotton ball, wipe conventional 500g law code no abnormal force
    The above test conditions:
    1, printed materials: clear glass, aluminum screen: 250 mesh / inch Blade: PU scraper 75 degrees.
    2, color: green sheet printing after the first dry white overprinting (room temperature 25 ℃ printing).
    3, drying time: Green 60 ℃ 15 minutes and the white 100 ℃ 30 minutes.
    Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
     Number Number Hue Hue
    47-L100 pink lemon yellow 47-Q100
    47-P113 purple light yellow 47-V100
    47-Y115 golden 47-E100 ultramarine
    47-R100 47-B100 red colors blue
    47-M100 47-G100 Green Rose
    47-S125 orange 47-K100 Black
    47-195 47-W100 white light syrup
    1. Formulation: Ink 100 parts hardener 10-20 15-20 parts solvent.
    (1) Ink hardener added, please use finished within 6 hours.
    (2) Ink join hardening dose, some weighing accuracy, to achieve maximum effect.
    (3) at room temperature, dried, hardened winter slows, and thus a corresponding increase in the drying time. Or humidity in the rainy season, due to moisture in the air to cause ink emulsification, resulting in poor curing conditions, and thus better heat drying.
    4. The above is about 47 glass ink on clean glass to dry before printing green printing on white, dry place for 24 hours after the test, due to the different colors and printed materials, ink display performance will be slightly different, Please user before volume use, should be adequately tested to confirm.
    2. Dilution: with SSI 7000 # as the diluent.
    3, and dried: 110 ℃ 20 分鐘, 80 ℃ 30 minutes. Since the ink is added 47-C191 hardener happen "cross-linking" reaction cured and dried, printed ink surface placed 2-3 hours after the initial dry (no Zhanshou), 24 hours basically dried at room temperature 25 ℃, but thoroughly dried maximum about 48 hours adhesion fastness, prints can accelerate chemical reactions by baking and drying.
    4, cleaning: You can use SSI 2000 # wash water network cleaning screen and squeegee.
    5, color service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.

    1), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse and treatment.
    2), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.