SSPET series screen printing ink is printed polyester film specially developed satin ink. Printing and post-processing job very well.
Printing range: suitable for printing polyester membrane switch ﹑ sticker and so on.
characteristic:
A, this series ink has good oil resistance, gasoline, alcohol resistance, chemical resistance and excellent weather resistance.
B, printed good workability, high-speed printing of excellent workability can be fine print.
C, this series of inks pastel semi-gloss effect.
D, this series of inks has a strong resistance to yellowing and softness, and abrasion resistance.
Dilution: SSI 5000 # (standard), 10-15% solvent was added in the ink may be printed.
Drying: A, 10-20 minutes at room temperature, the ink surface is dry. B, 80 ℃ dried by heating 20 minutes. C, but completely dried, preferably at room temperature 24 hours.
Cleaning: You can use SSI 3000 # wash water network cleaning screen and squeegee.
Ink adhesion test:
| Oroject | Test methods | result |
| Adhesion | Cross hatch tape peel test | 100/100 |
| Hardness | Pencil hardness test JIS K5400 8.4 | H-2H |
| Weatherability | Climate artificial sun simulator placed 700 hours | No abnormal |
| Alcohol resistance | 99.5% alcohol friction 100 times | No abnormal |
| Grease resistance | Friction with peanut oil 100 times | No abnormal |
| Alkali | Soaked in NaOH 5% water solvent 48 hours | No abnormal |
| Acid resistance | H2S04 5% soaked in water for 48 hours the solvent | Slight surface whitening |