This series of ink is two-liquid reaction type ink is low temperature hardening, the ink film after curing has excellent gloss, oil resistance, impact resistance, abrasion resistance, etc., after printing, the solvent evaporates quickly, along with dried ink film The gradual hardening, thus showing its advantages, below the solvent was evaporated drying.
Suitable for printing on PP and PE, metal, PET, FRP, FRT, urethane coated plates have been processed chrome plate and stainless steel.
Type: two-liquid reaction type curing agent 46-C191.
Solvent: SSI 5000 # (standard dry)
It can be used for printing plastic detergent bottles, cosmetic plastic bottles, all kinds of electroplating and water-plated parts.
Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
 Number Number Hue Hue
46-L100 pink lemon yellow 46-Q100
46-P113 purple light yellow 46-V100
46-Y115 golden 46-E100 ultramarine
46-R100 46-B100 red colors blue
46-M100 46-G100 Green Rose
46-S125 orange 46-K100 Black
46-195 46-W100 white light syrup
Instructions:
First, the formula: Ink 100 parts hardener 10-20 15-20 parts solvent
1, the amount of curing agent must be accurately weighed. Add the curing agent in the ink, and an increase in viscosity increase over time. Thus ink mixing within 8 hours after finished using.
2, a curing agent and moisture in the air curing reaction, please note sealed.
3, after printing, set screen and the ink scraped clean with detergent.
4, the temperature versus time dry, and wind speed and air volume Ovens related.
Second, drying: 60 ℃ 30 分鐘, 80 ℃ 20 minutes better side for 24 hours.
Third, the color matching service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.
Precautions:
1), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
2), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.