• Follow us :

    Products Center

    57 Series screen printing ink

    This is a series of ink formulated for direct printing on untreated hard polypropylene (PP material), this ink is not only dry fast, full color, its magnificent color display or better packaging requirements provided ideal attraction.
    Adhesion: with a variety of different specifications on untreated polypropylene has excellent adhesion. SSI 57 series ink ink film has hardness, elasticity and resistance to wear performance rich.
    Oil can be used for printing plastic buckets, exhaust fan, fan housing, PP plastic products.
    Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
     Number Number Hue Hue
    57-L100 pink lemon yellow 57-Q100
    57-P113 purple light yellow 57-V100
    57-Y115 golden 57-E100 ultramarine
    57-R100 57-B100 red colors blue
    57-M100 57-G100 Green Rose
    57-S125 orange 57-K100 Black
    57-195 57-W100 white light syrup
    1, the printing screen: In terms of polyurethane rubber scraper with 80-120T direct photographic film version made of wire mesh, for best results.
    2, dilution: the diluent is SSI 7000 #, added in a proportion of about 15%. GP- 1008 PP water directly printed material used to wipe the surface of the ink in use can not be infiltrated.
    3, Drying: This is evaporation drying type ink, the case put drying rack, just 20 minutes will be able to ink film surface is dry. In the rear of the 24 hours to get the best printing ink film hardness.
    4, cleaning: You can use SSI 3000 # wash water network cleaning screen and squeegee.
    5, the printing volume: Use proper dilution and printing materials, ink printed per kilogram to 40 square meters.
    6, color service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.
    1), SSI 57 for the printing inks are specially formulated polypropylene untreated hard and different polypropylene polymers are added to the different characteristics of the additive, so ink adhesion will be different degrees of impact, and therefore Prepress must be on the printing ink adhesion material for a test.
    2), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
    3), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.