This series of ink used in plastics, molds, metal, glass and electronics industry and other industries of printing ink, the ink printed ink film is characterized by the body after a hard object, formed with excellent adhesion, flexibility and resistance resistance.
Physical and chemical properties of this ink, it is highly suitable for use as a printed circuit board mark, while the detergent, oil and shampoo are also excellent corrosion resistance.
This ink is suitable for printing of acetaldehyde diethyl acetal, melamine, polycarbonate, polypropylene processed, polyethylene, acrylic acid, cellulose,
Acetic acid, hard PVC, metal and glass.
Adhesion: This type of ink is completely dry after the high toughness of the ink film.
It can be used for metal products, processed polypropylene plastic buckets, glass products.
Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
 Number Number Hue Hue
54-L100 pink lemon yellow 54-Q100
54-P113 purple light yellow 54-V100
54-Y115 golden 54-E100 ultramarine
54-R100 54-B100 red colors blue
54-M100 54-G100 Green Rose
54-S125 orange 54-K100 Black
54-195 54-W100 white light syrup
Instructions:
1, the formula: SSI 54 series is a two-component ink, one for the ink and the other is a catalyst containing varnish before use to first mix the ink and catalyst within eight hours after mixing. Ink stable physical properties after the ink drying ink and catalyst ratio related.
Ink catalyst characteristics
31 gives the highest softness and brightness
51 suitable for molding purposes
61 give the ink film hardness and resistance to the strongest resistance
Types of ink curing agent and curing agent ratio uses
43-C191 19: 1 or 20: 1 printed glass
54-C191 4: 1 or 5: 1 Indian metal
2, Screen: Only a direct or indirect use of this camera is suitable for stencil inks, other template material can not withstand this ink solvent.
3. Dilution: with SSI 7000 # as the diluent.
4, dry: SSI 54 series ink as printed on good hard materials such as treated polypropylene or polyethylene, metal surface, every other period of time to stabilize, but the real drying and maximum hardness to be reached only after 72 hours, available Ovens for rapid drying, but it should not be dried with a hair provided the following table on the drying time, for reference:

Substrate material temperature oven baking time
The printed wiring board 120 ℃ 10 分鐘
Metal 120 ℃ 10 分鐘
Glass 120 ℃ 15 分鐘
5, cleaning: You can use SSI 3000 # wash water network cleaning screen and squeegee.
6, the printing volume: Use proper dilution and printed materials, printed ink per kilogram up to 17-20 square meters.
7, matching service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.
Precautions:
1), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
2), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.