• Follow us :

    Products Center

    66 Series screen printing ink

    This is a series of ink suitable for printing metals research and development of high-light-type screen ink. Its good printability, weatherability long.
    SSI 66 series is a thermosetting type ink must be completely dry before baking at a high temperature, otherwise at room temperature is not completely dry. This series of ink for stamping, plugs, twists formed with good results. With a high solid content, high hardness, excellent resistance to alcohol and other chemical properties.

    Can be used for printing metal nameplate, signs, metal products (non-plating and painting surface treatment).

    Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.

     Number Number Hue Hue
    66-L100 pink lemon yellow 66-Q100
    66-P113 purple light yellow 66-V100
    66-Y115 golden 66-E100 ultramarine
    66-R100 66-B100 red colors blue
    66-M100 66-G100 Green Rose
    66-S125 orange 66-K100 Black
    66-195 66-W100 white light syrup
    1, the printing screen: select suitable material printing according to different needs. Generally used in polyurethane squeegee hardness 70-75 with 8 0-120T polyester mesh, printing was better.
    2, dilution: Dilute with water SSI 8000 # or dry dilution water according to weather changes adopted SSI 8200 # slow, adding ratio is about 10-20%.
    3, Drying: it must bake for 12-15 minutes until dried at 180-185 ℃.
    4, cleaning: You can use SSI 3000 net wash water cleaning screen and squeegee.
    5, color service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.
    1), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
    2), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.